manualshive.com logo in svg

SKC 770-300A, Operating Instructions Manual, Page: 29 / 36

Share
Download
SKC 770-300A Operating Instructions Manual Download Page 29

www.skcltd.com 

770-300M Issue E 

Page 27

Downloading the Sample Data to a PC

Refer also to the DustComm Pro software manual for detailed instructions on the installation 

and use of the software.
The following is a summary of the process of downloading the sample data.
Connect the Split2 monitor to the serial port on the PC using the supplied RS-232 data cable. 

Ensure that both connections are secure as an intermittent connection will disrupt the data 

transmission.
A USB to serial adapter cable (not SKC supply) is required if the PC does not have a serial 

interface port. The USB to serial adapter must be configured in Windows Device Manager 

such that its COM port number is set to an available number in the range COM1 to COM4.
Run the DustComm Pro software. Select the Unit menu option on the DustComm Pro window 

and select Properties.
On the Properties window ensure that the Unit Type is set to “Split 2” from the drop down list. 

Ensure that the Download Port is set to the correct COM port number on the PC from the drop 

down list. Click the OK button to close the Properties window.
Select the Unit menu option on the DustComm Pro window and select Download. A progress 

window will open with the message “Awaiting connection...”.
On the Split2 monitor, from the main menu screen 

press the up and down keys to highlight the Review 

Data menu item. Press enter to display the Review 

Data menu screen.

  Run
  Review Data
  Special Functions
  Auto-Zero

On the Review Data screen press the up and down keys 

to highlight the Download menu item. Press enter to 

display the Download menu screen.

  Statistics
  Download
  Cancel
  

On the Download menu screen press enter to select 

the To Data Collector menu item and initiate the data 

download.

  To Data Collector
  Cancel
  
  

The screen will show a Transmitting message and 

then revert to the Download menu screen indicating 

that the data transfer is complete.

  
    Transmitting
    Please Wait
  

On the DustComm Pro software progress window the message “Connection established, 

downloading data...” will be displayed and a progress bar will show the data transfer 

proceeding. 
On completion of the data transfer the progress window will show the message “The download 

was successful!”. Press the OK button on the window to close it.
Refer to the DustComm Pro software manual for details of working with the downloaded data.

Summary of Contents for 770-300A





































Reviews:

No comments