www.skcltd.com
770-300M Issue E
Page 11
Initial Setup of the Split2 Monitor
Use the up and down keys to adjust the underlined
value.
Time: ▵ : :
Date: - -
Day:
Press the enter key to enter the selected value and the
next digit is highlighted by the underlined cursor.
Time: 1▴: :
Date: - -
Day:
Enter the hours, minutes and seconds of the time in 24
hour clock format.
Time: 15:36:00
Date: ▴ - -
Day:
Enter the date in dd-MMM-yy format and the day of the
week.
Time: 15:36:00
Date: 12-JUL-12
Day: THUR
On pressing the enter key after setting the day of the
week a confirmation screen is displayed.
Set Date/Time
Cancel
Select the Set Date/Time menu item and press the
enter key to save the date and time just entered, or
select the Cancel menu item to retain the existing time
and date. The main menu screen is then displayed.
Run
Review Data
Special Functions
Auto-Zero
2) Clearing the Data Logging Memory
The memory of the Split2 monitor can be cleared at any time. Note that this operation will
clear all data points in all locations from the memory.
On the main menu screen use the up and down keys to
highlight the Special Functions menu item and press
enter to show the new screen.
System Options
Date/Time
Set Alarm
Cancel
On the System Options menu screen press enter to
select the System Options menu item and show the
new screen.
Extended Options
Sample Rate
Erase Memory
Cancel