SKC 770-300A Operating Instructions Manual Download Page 22 | Manualshive

Page: 22 / 36

SKC 770-300A Operating Instructions Manual Download Page 22

Page 20

770-300M Issue E

www.skcltd.com

Sampling With the Split2 Monitor

Once the setup procedure has been completed as detailed in the previous section the Split2

monitor is ready to begin sampling.

1) Mounting the Split2 Monitor on the Worker

Mount the Split2 monitor onto the worker using the belt clip to secure it to the worker’s belt.

If using the Split2 monitor in Active (Pumped) mode mount the air sample pump adjacent to

the Split2 monitor securing with the pump’s belt clip.
Attach the sensor head to the worker’s clothing using the spring clip. The sensor head should

be mounted within the worker’s breathing zone, which is defined as a hemisphere of 30cm

radius extending in front of the face and centred on the mid point of a line joining the ears.
Ensure that the sensor cable (and tubing if using the Split2 monitor in Active mode) are

adequately secured to the worker’s clothing to prevent them from obstructing the worker’s

movements.
Note: It is recommended to mount the equipment on the worker’s left hand side for right

handed workers and vice versa for left handed workers.

2) Initiating Sampling

If using the Split2 monitor in Active mode start the air sample pump running.
On the main menu screen press the up and down keys

to highlight the Run menu item and press enter to

display the new screen.

Run
Review Data
Special Functions
Auto-Zero

On the Run menu screen select the Run - Continue

option to begin sampling with the alarm function

disabled, retain the existing data and store the new

data in the next available memory location.

Run - Continue
Run - Overwrite
Alm - Continue
Alm - Overwrite

Alternatively select the Run - Overwrite option to begin

sampling with the alarm function disabled, delete

the existing data and store the new data in memory

location 001.

Run - Continue
Run - Overwrite
Alm - Continue
Alm - Overwrite

Alternatively select the Alm - Continue option to begin

sampling with the alarm function enabled, retain

the existing data and store the new data in the next

available memory location.

Run - Continue
Run - Overwrite
Alm - Continue
Alm - Overwrite

Alternatively select the Alm - Overwrite option to begin

sampling with the alarm function enabled, delete

the existing data and store the new data in memory

location 001.

Run - Continue
Run - Overwrite
Alm - Continue
Alm - Overwrite

«
...
20
21
22
23
24
...
»

Summary of Contents for 770-300A





































Reviews:

No comments