Skandika LITEN, Assembly Instructions And User Manual

Page: 22 / 40

22
Computer operation manual
Remarks
• AUTO ON/OFF: As soon as a movement starts or the button is pressed, the computer
will switch on. The computer does also switch off automatically, if there is no action
for approx. 4 -5 minutes.
• If the display quality gets poor, you should replace the batteries.
Parts list
No. Description Q‘ty
01 Main frame 1
02 Front stabilizer 1
03 Rear stabilizer 1
04 Console 1
05 Handlebars 1
06 Separate console bracket 1
07 Carriage bolt 4
08 Curved washer 4
09 Nut 4
10 Crank L 1
11 Crank R 1
12 Sensor wire lower 1
13 Pedal (L) 1
14 Pedal (R) 1
15 Sensor wire middle 1
16 Screw set 1
17 Axle for belt pulley 1
18 Plastic washer 1
19 Belt pulley set 1
20 Hex head nut 1
21 French nut 2
No. Description Q‘ty
22 Self-tapping screw 7
23 Crank cover 2
24 Fixed plate 2
25 C-clip 6
26 Bearing 2
27 Bearing bracket 2
28 Wave washer 1
29 Flywheel set 1
30 Belt pulley set 1
31 Self-tapping screw 7
32 End cap 2
33 Belt 2
34 Tension knob 1
35 Tension knob bracket 1
36 Flat washer 1
37 Self-tapping screw 1
38 Self-tapping screw 1
39 Spring 1
40 Magnet bracket 1
41 Self-tapping screw 1
Wrench 1
Allen key 1
Cleaning and care
• Before cleaning the appliance, make sure that the computer is switched off.
• Clean the device with a slightly damp cloth only. Never use brushes, aggressive cleaning agents, petrol,
thinners or alcohol. Rub the device dry with a clean dry cloth.
• Wait until the device is completely dry before using it again.