Skandika LITEN, Assembly Instructions And User Manual

Page: 17 / 40

17
GB
Assembly instructions
No. Description Q‘ty
01 Main frame 1
02 Front stabilizer 1
03 Rear stabilizer 1
04 Console 1
05 Handlebars 1
06 Separate console bracket 1
07 Carriage bolt 4
08 Curved washer 4
09 Nut 4
13/14 Pedals 1/1
15 Sensor wire (middle part) 1
16 Screw set 1
Wrench 1
Allen key 1
Before starting to assemble we recommend to look for a place with sufficient space. Use a floor protection.
Remove all parts from the carton and spread them on the floor. Check according to the checklist, if all parts
are complete. Perhaps some parts are already pre-assembled for your convenience.
We recommend to use the provided tools to set-up this device.
Step 1
Mount the handlebars (05) on the front stabilizer (02) with the help of the screw set (16). Fix the front sta-
bilizer (02) on front part of main frame (01) with 2 screws (07), 2 curved washers (08) and 2 nuts (09). Now
fix the rear stabilizer (03) on rear part of main frame (01) with 2 screws (07), 2 curved washers (08) and 2
nuts (09).