IndustrialPro™ and MobilityPro™ Gateway
User's Guide
Copyright © 2010 Sixnet LLC. All rights reserved.
43
1.11
– November 2, 2011
If the modem is configured to report GPS fixes to a remote destination, then the reporting
frequency determines the cellular network bandwidth consumption. A higher reporting frequency
will result in higher bandwidth consumption. Plan carefully to ensure you do not exceed your
monthly bandwidth plan.
The modem can be configured to report GPS in two ways:
The first is to use BlueVue Device Manager for basic GPS reporting. This allows easy configuration of timer-based GPS
reports. Refer to the
Basic GPS Reporting in BlueVue Device Manager
appendix for a step-by-step configuration
example.
The second is to use AT commands for advanced configuration. This method is more complex and can take advantage of
the modem's Event Reporting capabilities (see next section). Event Reporting allows the modem to report automatically
when a user-defined condition is met. Read the
Event Reporting
section for details.
Summary of Contents for IndustrialPro
Page 72: ......
