IndustrialPro™ and MobilityPro™ Gateway
User's Guide
Copyright © 2010 Sixnet LLC. All rights reserved.
29
1.11
– November 2, 2011
Figure 7 – Editing the account information
1)
Enter the
Dial String:
#777
for CDMA modems
*99#
for HSPA modems (Bell Mobility and Telus)
*99***1#
for other GSM modems (EDGE and HSPA)
2)
Enter the User Name and Password if provided by your cellular carrier otherwise, leave
them empty.
3)
Select
Always On
or On Demand (explained below) depending on the desired connection
initiation behavior.
4)
Enter
APN
information that was provided to you if you are using a
GSM modem
. The APN
field is only shown when BVDM is connected to a GSM (EDGE and HSPA) modem.
When the modem is set to Always On, it will attempt to maintain a permanent connection to the cellular network on its
own. Most applications will require the modem to be remotely accessible at any time, and will require the modem to be
set to Always On.
When the modem is set to On Demand, the modem does not connect to the cellular network unless told to by the
attached terminal. If disconnected from the cellular network, it will not attempt to reconnect. The most common On
Summary of Contents for IndustrialPro
Page 72: ......
