Use and Maintenance Manual
–
002.108A of _27/09/2021
Square Baler
–
M 60 Mini/S
–
M 60 Mini
–
M 60 Super
10
ENGLIS
H
It is absolutely prohibited to stand between the machine and the tractor unless the brakes are
engaged and the shut-off devices are activated.
Do not operate the machine indoors or in closed environments .
WARNING!
When the machine is running, people and animals should stay at least 40 meters away!
Therefore keep away from the movable rear chamber which ejects the bales and creates a
hazardous situation.
When the machine is parked on loose or soft ground, the additional support must be inserted
underneath the parking stand for proper stability.
The machine described in this
“
Use and Maintenance Manual
”
should be repaired or
disassembled only by authorized mechanics or by the manufacturer.
POWER TAKE-OFF (PTO)
WARNING!
Only the CE-type approved PTO shafts can be used with this machine, and the user must follow
the instructions given in the Use and Maintenance Manual issued by the manufacturer of the
PTO shaft.
The power take-off protective shields must be installed in the correct position.
The PTO shaft can be mounted and removed only if the PTO is disengaged, the engine is turned
off, the ignition keys are removed from the ignition and the parking brake is engaged.
Make sure that the PTO shaft is mounted correctly.
Make sure that the chains are attached to the PTO shaft protective shield to prevent rotation.
Before engaging the PTO, check that the machine rpm is the same as the tractor PTO rpm (max
540 rpm) and that the PTO direction of rotation is counterclockwise. Make sure there is no one
in the danger area of the machine.
Never engage the PTO when the engine is running.
When working with the PTO, it is prohibited to stand near the PTO shaft or the PTO, and the
PTO must be disconnected if the angles are too great.
Do not get too close to the machine even when the PTO is disengaged.
To clean or lubricate the machine or to carry out maintenance and repairs, turn off the engine,
disengage the PTO, remove the keys from the ignition, and engage the parking brake. Once the
PTO shaft has been disconnected from the power take-off, it must be supported with a special
support so that it does not touch the ground and become damaged or dirty.
The PTO protective guard must always remain at least 50 mm below the cardan protection
guard.
NOISE LEVEL
The noise level in the driver's seat is: L
eq
= 79.5 dBA. Ear protectors are recommended when using
the tractor without a soundproof cab (if the noise level exceeds 85 dBA)