Use and Maintenance Manual
–
002.108A of _27/09/2021
Square Baler
–
M 60 Mini/S
–
M 60 Mini
–
M 60 Super
63
ENGLIS
H
7.4.7 Knotter billhook tongue adjustment
With the knotter in the rest position, the billhook tongue (ref. 1, Fig. 7.18) must open if subjected to
a force between 5 and 10 kg. If necessary, tighten or loosen the spring (ref. 2, Fig. 7.18).
ATTENTION! The twine knotter compartment must be cleaned (see Table 6.1) to avoid the clogging
and jamming of parts that may prevent them from functioning properly (for example: the crescents
control shaft, the straw trap pawls, etc.)
ATTENTION! If the knotter is uncovered during use, the operator must be very careful to avoid any
possible risk.
Fig. 7.18
