Use and Maintenance Manual
–
002.108A of _27/09/2021
Square Baler
–
M 60 Mini/S
–
M 60 Mini
–
M 60 Super
48
ENGLIS
H
Fig. 7.2
7.2 Drive adjustment (TIMING)
The timing of the machine is done in two stages:
- the timing of the forks with the carriage (A);
- the timing of the knotter/needles with the carriage (B).
7.2.1 Forks/carriage timing (A)
Timing of the forks with the carriage
1) Make the connection with the chain 10 (Fig. 7.3) between the gear 1 (Fig. 7.3), made idle on its
axle by loosening the socket head (Allen) screws, and the fork control gear of the double gear 2
(Fig. 7.3).
2) Move the carriage forward up to the reference position A (tips of the carriage in the plane of the
fork passage slot) and position the crank of the first fork so as to have a distance of about 65 to 95
mm (if the fork is mounted with the inclined side towards the bale chamber, Fig. 7.4) or about 45 to
65 mm (if the fork is mounted with the perpendicular side towards the bale chamber, Fig. 7.5).
Under these conditions, the gear 1 (Fig. 7.3) is secured to its axle with the Allen screws.
The multi-hole flange system makes it possible to lock the gear 1 (Fig. 7.3) in the required position
with a minimum deviation.
