Sirona Dental Systems GmbH
Operating Instructions CEREC AC
6 Installation and startup
6.4 Initial startup
63 33 582 D3492
D3492.201.01.22.02 10.2018
35
If the acquisition unit is switched on at the main switch, it can be
activated with the ON button. The monitor is switched on and off
automatically (if it was switched on before the acquisition unit was
switched off).
You can switch the monitor on and off with the monitor ON/OFF switch.
A
Monitor ON/OFF switch
C
CC
B
ON button
1.
Switch the acquisition unit on at the main switch.
2.
Switch the acquisition unit on at the ON switch.
NOTE
Possible data loss and PC malfunction:
Switching the acquisition unit off at the ON button during operation
may cause data loss and PC malfunctions.
➢ Always switch the unit off as described in the chapter "Switching
the units off".
3.
Switch the monitor on.
4.
Switch the milling unit on (see the Operating Instructions for the
Milling Unit).
5.
After loading the operating system, start the
"CEREC SW"
application by double-clicking on the
"CEREC SW" icon.
6.
For descriptions of further software actions, an online help function
can be invoked with "F1" or via the Help... menu option.
NOTE
Internet Explorer V 5.0 or higher must be installed on your system in
order to use the online help function.
Summary of Contents for cerec ac
Page 83: ......
