Sirona Dental Systems GmbH
Operating Instructions CEREC AC
7 Operation
7.7 Acquisition control with CEREC SW
63 33 582 D3492
D3492.201.01.22.02 10.2018
47
7.7
Acquisition control with CEREC SW
With the CEREC camera you can switch between two acquisition
modes:
● manual
● automatic
After being switched on, the CEREC camera is set to automatic
acquisition control.
NOTE
Image brightness
The image brightness during the scan is controlled automatically, so
that there is always optimum image brightness, largely independent of
the distance between the CEREC camera and the tooth.
The surroundings of the tooth to be scanned should be as weakly
illuminated as possible. Avoid any type of external light. Switch off the
dental light.
Changing from automatic to manual acquisition control
You can change from automatic to manual acquisition control.
ü
You are now using automatic acquisition control.
1.
Place the cursor on the camera icon.
2.
Press the foot control upward and keep it pressed.
Ä
A green cross appears in the live image. Manual acquisition
control is active.
You can exit manual acquisition control in the same way.
Summary of Contents for cerec ac
Page 83: ......
