15
Note: In some instances the plastic Rawlplugs supplied my need to be substituted with fibre rawlplug's,
if the appliance is likely to heat the screw eyes.
If the fireplace does not allow for the exact layout shown, the eyebolts should be fixed to give a similar
configuration as possible.
Thread the tensioning cable through the holes at the top of the firebox, then through the two screw
eyes in the top position and then through the one at the lower position, back through the lower hole in
the firebox as shown in the diagram.
Diagram 6
Open out Tab’s with
screwdriver to
except the cable tie
520 Max
420 Min
Screw Eye Positions
100mm
203mm
550mm