22
The appliance is supplied with a decorative frame, the frame attaches to the firebox as a three piece or
one piece clip-on unit. Place the magnets supplied to the outer frame of the fire box.
A plastic protective coating may be applied to the face of the frame assembly, which should be
removed at this stage; the one piece unit can be placed in position, with the three piece unit you should
start with the side pieces of the clip-on assembly, these should be pushed into position first, followed
by the top bar, which should overlap the sides.
IMPORTANT NOTE: Due to the possibility of sharp edges, care should be taken when
handling the three piece frame components, the use of protective gloves is
recommended.
Place the fire front/ fret into position in front of the fire and slide the ashpan door into place.
The fire front/fret shown in these instructions may differ from the one supplied with the appliance, we
strongly recommend you use a fire front/fret supplied by Sirocco fires as these products will have been
tested with the appliance, although other fire front/frets will be compatible.
Turn on and test the gas supply up to the fire for any leaks, in accordance with current Approved Codes
of Practice (ACOPs)
(See Section 18: Users Instructions)
Section9: FITTING THE DECORATIVE FRAME
Section 9: COMMISSIONING THE APPLIANCE
Section 10.1: OPERATING THE APPLIANCE
