11
Always ensure that the gas supply is isolated before commencing installation of the appliance.
The fireplace opening and environment must be in compliance with specifications laid down in the
appropriate sections of these instructions.
Remove the appliance from its carton as described previously and stand on a dust sheet, place the
coals, ceramics and fixings safely to one side.
Remove the burner from the assembly by removing the two screws at the base of the burner tray and
undoing the connecting nut to the isolation tap.
Unsecure the glass panel from the box as shown below, Remove outer cover to the glass Panel.
Remove the manual burner from the assembly by removing the two screws at the base of the burner
tray and undoing the connecting nut to the isolation tap.
Now, remove the 2 screws on the top of the burner tray.
ISOLATION
TAP
SCREWS
Section 7: INSTALLATION OF THE APPLIANCE
