25
BRIDGE FUNCTION
As soon as the parboiling time is over, the preselected continuous cooking level is valid again.
Once the time from the chart below expires, the function is switched off and “A” disappears. You can also
switch the automatic cooking mode off anytime by bringingpower setting to “0”.
With the bridge function two separate cooking elements/inductors with the same diameter and equal
power can be turned on at the same time and controlled with only one operation.
Activating Bridge Function
Whether the two zones are working at a different level, whether they are at level “0”:
• Simultaneously press anywhere on the slider (F) of the zones:
• Now the two areas work together, the LEDs to the right of the corresponding displays turn on. The
level is shown on the display of the control zone, in the meanwhile the controlled zone’s displays turns
off.
• When thisfunction is active, you can set a timer, the LED lights on near both displays of the zones,
moreover it’s not possible setting a particularly powerful cooking function.
Deactivating Bridge Function
• The end of the Bridge Function can be done by repeating the simultaneous selection of both cooking
elements (the same as activation).
If the bridge function is deactivated while in operation, than both cooking elements go to level “0” and can
be set again.
• If in 10 uninterrupted minutes no cookware is detected on one of the two elements, the bridge function
is automatically deactivated, the uncovered cooking element is switched off and the covered cooking
element remains as the single cooking element switched on with the set cooking level.
1 e 2, 3 e 5
Power setting
1
2
3
4
5
6
7
8
Max. power cooking time
48”
1’44”
2’28”
3’12”
4’08”
1’20”
1’68”
2’16”
Summary of Contents for S-DDH1.1
