Sirius Satellite Radio S-DDH1.1, Installation And Operation Manual

Page: 22 / 44

22
SWITCHING HOTPLATES OFF
SWITCHING THE HOB OFF
LOCKING THE CONTROL UNIT
Unlock the control:
Deactivating the control unit lock
• Selected hotplate must be activated.
• By touching the slide sensor (F) at the start, bring he power setting to “0”. Short beep
confirms the OFF position.
• The hob is switched off by pressing the main (A) sensor.
• The sound signal beeps and all indicators go off, except for those hotplates which are still hot
and display the warning “H” sign as an indication of the remaining heat.
• If you switch the hob off prior end of cooking session, use the remaining heat and save
electric energy.
• By activating the key lock protection you can stop the operation of the appliance and the use
of hotplates.
Activating the control unit lock
• The cooktop must be turned on.
Model SDDH1.1
• Simultaneously press “C” and “I” and immediately after again the button “C”. All displays
show the letter “L”. The block is active.
• The safety lock secures all sensors operated by mistake, except the sensor “A”.
• If the hob is turning off when the lcok function is activated, this function will remain in memory
until the hob is switched off again.
• The hob must be switched on.
• Temporary Unlock: Simultaneously press “C and I”. Now you can use the controls. When
switched on, the hob will be locked again.
• Permanent Unlock: Simultaneously press “C and I” and immediately after the button (I) again.
When switched on again, the block is off.
• The cooktop must be turned on.
• Press the sensor (C) for 1 second; after that, the unlocking is confirmed by a beep.