33
ELECTRICAL CONNECTION OF THE
DOWNDRAFT
Once the installation is completed it is necessary
to give electricity supply to the Downdraft pressing
the red button placed above the metallic box with
the wiring boards inside.
This appliance is fitted with an H05 VVF 3
conductor, 0.75 mm2 (neutral, phase, and
ground) power cord.
This can be connected up to a 220 - 240 V
mono-phase electrical network through a
CEI 60083 approved power socket, which
must remain accessible after installation, in
compliance with installation regulations.
We decline any responsibility in case of
accidents caused by a lack of ground
connection or incorrect ground connection.
The appliance must be fed through a differential
protection device (RCD), with a nominal residual
current not exceeding 30mA.
If the power cord is damaged, call the aftersales
service to avoid any risk.
CAUTION
Summary of Contents for S-DDH1.1
