Video
Page 73
12.5
Live View
Video > Live View
12.5.1
(M)JPEG output
The TC620-PID provides multiple (M)JPEG output methods.
To transport JPEG over
HTTP
and/or to use the Live View previews in the webpages, enable
the Live View encoder and configure its settings.
To enable and configure
UDP
/MJPEG streaming, go to the Encoder 1/2 tab, select MJPEG
encoding mode and configure settings.
To activate the uploading of JPEG images to an FTP server, configure the required settings
on the FTP Push tab and the Event Management page.
12.5.2
Encoder Settings
Item
Description
Enable
All encoders are enabled by default. Use this check box to disable/re-enable this
specific encoder.
Video bit rate mode
Controls variations in bit rates.
Constant quality
Keeps the image quality constant, with varying network load.
The quality is determined by the value set for the
Quality
parameter (see below).
Constant bit rate
Keeps network load constant at the cost of varying image
quality. Frames may be skipped.
Resolution
Set sensible combinations of mode, resolution, frame rate and (maximum) bit rate.
Frame rate
(Maximum) bit rate
Actual bit rate
Constant Quality
Mode (CQM) only
This field is dynamically updated with the current bit rate to
provide feedback on the bit rate that is used on average with
the current
Quality
setting.
