TC620-PID
Page 34
PTZ control
Use the upper section of the PTZ Control panel to pan, tilt, zoom, and focus the camera, and
control the iris, as shown in the following figure.
PTZ Control panel
Preset
Use the Preset section to define and recall preset camera positions.
To enter and save a preset camera position
1. Click the appropriate number button(s) to enter the preset number.
2. Adjust the position of the camera for the desired view.
3. When satisfied with the position, click
SET
.
Note:
The SET button is not available to users with Viewer rights.
To recall a preset camera position
1. Click the appropriate number button(s) to enter the preset number.
2. Click
GO
.
To erase a preset camera position
1. Call the preset.
2. Press
Clear
.
3. If desired, override the preset with a new preset position.
