TC620-PID
Page 162
CCTV configuration
The CCTV Configuration conformance group consist of objects that specify the configuration
parameters of a CCTV. For details, refer to NTCIP 1205. Conformance requirement within the
group is mandatory.
rangeMaximumPreset
rangePanLeftLimit
rangePanRightLimit
rangePanHomePosition
trueNorthOffset
rangeTiltUpLimit
rangeTiltDownLimit
rangeZoomLimit
rangeFocusLimit
rangeIrisLimit
rangeMinimumPanStepAngle
rangeMinimumTiltStepAngle
timeoutPan
timeoutTilt
timeoutZoom
timeoutFocus
timeoutIris
labelTable
labelEntry
labelIndex
labelText
labelFontType
labelHeight
labelColor
labelStartRow
labelStartColumn
labelStatus
labelLocationLabel
labelEnableTextDisplay
Motion control
The Motion Control group defines the variables that provide PTZ control. For details, refer to
NTCIP 1205. Conformance requirement within the group is mandatory.
presetGotoPosition
presetStorePosition
positionPan
positionTilt
positionZoomLens
positionFocusLens
positionIrisLens
Note:
Camera control through NTCIP on Siqura multichannel products is limited to video
channel 1.
SNMP MIB
NTCIP has its own SNMP MIB. This database is used to store information, which is used to control
cameras and other devices in the transportation management system. An electronic version of
the MIB is available from a NEMA FTP site. To get access to the FTP site, send your name,
organisation name, and email address to [email protected], and request access.
