Safety and compliance
Page 13
Handle the camera carefully
Do not abuse the camera. Avoid bumping and shaking. The camera can be damaged by improper
handling or storage.
Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no user serviceable parts
inside. Consult technical support if a camera is suspected of malfunctioning.
Do not use strong or abrasive detergents to clean the camera
Use a dry cloth to clean the camera when it is dirty. If the dirt is hard to remove, use a mild
detergent and wipe gently. To clean the lens, use lens tissue or a cotton tipped applicator and
ethanol. Do
not
clean the lens with strong detergents.
Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the
sun or other extremely bright objects, as this can damage the camera.
RoHS statement
Global concerns over the health and environmental risks associated with the use
of certain environmentally-sensitive materials in electronic products have led
the European Union (EU) to enact the Directive on the Restriction of the use of
certain Hazardous Substances (RoHS) (2002/95/EC). Siqura offers products
that comply with the EU’s RoHS Directive. The full version of the Siqura RoHS
statement can be viewed at www.siqura.com.
Product disposal
The unit contains valuable materials which qualify for recycling. In the interest
of protecting the natural environment, properly recycling the unit at the end of
its service life is imperative.
When processing the printed circuit board, dismantling the lithium battery calls
for special attention. This kind of battery, a button cell type, contains so little
lithium, that it will never be classified as reactive hazardous waste. It is safe for
normal disposal, as required for batteries by your local authority.
