TC620-PID
Page 50
11.2
Advanced
Network > Advanced
11.2.1
Services
Item
Description
RTSP server enable
Select this check box to enable the TC620-PID to act as a server in RTSP media
sessions.
RTSP server port
This is the port number used to contact the RTSP server. The default transport layer
port number for the RTSP protocol is 554 for both UDP and TCP transports.
11.2.2
Network
Item
Description
DHCP enable
Allows assigning of the IP address by a DHCP server instead of using static IP
addressing.
Ethernet mode
Transmission mode and speed.
Auto
Autonegotiation (default).
10 HDX
Half duplex, 10 Mbit.
10 FDX
Full duplex, 10 Mbit.
100 HDX
Half duplex, 100 Mbit.
100 FDX
Full duplex, 100 Mbit.
MTU size
Set to Ethernet (1500) by default. Maximum Transmission Unit (MTU) is the
maximum size (in bytes) of IP packet that can be transmitted over the network without
dividing it into pieces. An MTU size that you select here must be supported on the
other side of the link.
