Siqura PD900 Series, User Manual

Page: 13 / 64

Web interface
Page 13
Set Center Mode
Right-click the live video pane and select Set Center Mode . Now you can position the area of interest in the center of
the live video pane by clicking on the point of interest. To leave the Set Center Mode, right-click the live video pane
again and select
Set Emulated Joystick Mode . In this mode you can control the camera direction by left-clicking and
dragging the pointer in the live video pane.
3.2 System
Select the System tab to open the System page (see below).
System page
Note: The System page is only available for the administrator.
3.2.1 System
Select the System category on the left to set the System parameters.
Host Name
The Host name is used for camera identification. If the alarm function (see section 3.2.8) is enabled and set to send
alarm messages by Mail/FTP, the host name entered here will be displayed in the alarm message.
Time Zone
Select the appropriate time zone (i.e. the time zone that corresponds with the location of the camera) from the
drop-down menu.
Enable Daylight Saving Time
To enable Daylight Saving Time (DST), activate the check box and then specify the time offset and the DST duration.
The format for time offset is [hh:mm:ss]. For instance, if the time offset is one hour, enter “01:00:00” in the field.