Siqura PD900 Series, User Manual

Page: 36 / 64

PD900 Series
Page 36
To delete a schedule, select it from the list and click the Delete button.
Disable Recording Schedule
Select Disable to terminate the recording function.
Click the Save button to confirm the selection.
3.2.11 Schedule
The schedule category on the left gives access to the Schedule parameters.
This schedule function allows you to set up schedules for features including Alarm Switch, Motion Detection and
Network Failure Detection. The function supports up to 10 sets of time frames in the time frame list.
Schedule pane
Setting Schedules
1 Select a time frame from the time frame list.
2 Check the weekday boxes of the desired weekdays.
3 Select a time mode: Day , Night or Time . For the Time mode, specify the start time (hour:minute) and the time
duration (hour:minute) to activate the schedule-triggered features. The time duration range is from 00:00 to
168:59.
4
(Optionally) Click the Delete button to delete a chosen period.
5 Click the Save button to save the settings.
Time Mode

Day
The camera profile will be loaded when IR cut filter is on.

Night
The camera profile will be loaded when IR cut filter is off.

Time
Denotes the start time and the time duration for the schedule.