Siqura PD900 Series, User Manual

Page: 51 / 64

Web interface
Page 51
Sequence Run
Select the configured Sequence Line from the drop-down list and click the Go button. The camera will start moving
forward each scene sequentially as programmed.
To view the camera executing a Sequence Line in full screen mode, move the cursor to the live view pane, right-click
and left-click to select
Fullscreen . You can now view the camera navigation in full screen.
To stop running the Sequence Line, simply move the cursor to the live view pane and move the camera in any
direction.
3.5.5 Home Function
You may set an operation mode to ensure constant monitoring. If the camera idles for a period of time, the selected
function will be activated automatically. This is the Home function. The Home function allows constant and accurate
monitoring to prevent the camera from idling or missing events.
Home Setting

Switch
Select
On or Off to activate or de-activate the Home function. Then click the Set button to apply the setting.

Time
The time represents the camera idle time previous to running a Preset Point / Cruise Line / Auto Pan Path /
Sequence Line. When the Home function is activated, the camera will start to count down when idle, and will
execute the predefined action as the time expires. The time ranges from 1 min. to 128 min. Specify the time and
Click the
Set button to save the settings.

Type & Line
Select a Home action type (Preset Point / Cruise Line / Auto PanPath / Sequence Line) and select the number of
the Preset Point / Cruise Line / Auto Pan Path / Sequence Line from the drop-down Type and Line lists. Click the
Set button to save the Home settings.
3.5.6 Tilt Range
The camera’s tilt angle is adjustable from a minimum of −20° to a maximum of +100°. Enter the desired minimum and
maximum tilt angle in the relevant fields. Click the
Set button to save the tilt angle settings.
3.5.7 Privacy Mask
The Privacy Mask function serves to avoid any intrusive monitoring. When setting a mask, it is recommended to set it
twice as large (height and width) as the masked object. The camera will assume the center of the selected view as the
starting point. Therefore, keep the target object or region positioned near the center of the scene.
Mask Setting

Switch
Select
On or Off to activate or de-activate the Privacy Mask function. Click the Set button to apply the setting.

Color
Select a color from the Color drop-down list or fill in the color code for the programmed Privacy Mask. Click the
Set button to apply the setting.

Mask Number (1~20)
Enter the number of the programmed Privacy Mask in the entry field.

Zoom Factor
Normally, a privacy mask is repositioned and resized to cover the masked area whenever the camera is
panned/tilted/zoomed. The Zoom Factor allows you to hide the mask when the zoom ratio is set lower than the
original ratio.
For example, when the privacy mask is set at a certain zoom ratio (e.g. 5x), the privacy mask will be resized
when the camera is zoomed in (e.g. from 5x to 20x). However, when the camera zooms out (e.g. from 5x to 2x),
the privacy mask will be hidden.
Select
On or Off to activate or de-activate the Zoom Factor function.
Follow the steps below to set up a privacy mask.