● Preset Speed: You can set the speed of a defined preset from 1 to 8.
● Manual Control Speed: The camera provides five manual control modes: Compatible,
Pedestrian, Non-motor Vehicle, Motor Vehicle, and Auto.
● Keyboard Control Speed: Define the speed of PTZ control by a keyboard as Low,
Medium or High.
● Auto Scan Speed: The auto scan speed can be set from level 1 to 40.
● Zooming speed: The zoom speed is adjustable from level 1 to 3.
PTZ OSD
This is where you set the on-screen display duration of the PTZ status.
● Zoom Status: Set the OSD duration of the zooming status as 2 seconds, 5 seconds, 10
seconds, Normal Close or Normal Open.
● PT Status: Set the azimuth angle display duration while panning and tilting as 2 seconds,
5 seconds, 10 seconds, Normal Close or Normal Open.
● Preset Status: Set the preset name display duration while calling the preset as 2
seconds, 5 seconds, 10 seconds, Normal Close or Normal Open.
Power-off Memory
The dome can resume its previous PTZ status or actions after it restarted from a power-off.
You can set the point in time for which the dome resumes its PTZ status. You can set it to
resume the status of 30 seconds, 60 seconds, 300 seconds or 600 seconds prior to power-off.
Prioritize PTZ
The speed dome can be controlled by network and RS-485 signals. You can set the control
priority of these two signals. An Operator action has priority over that of a User. When the
Operator is controlling the speed dome, the User cannot control it. When the Operator
finishes, the User can control the speed dome after the Delay time. The Delay time can be set
from 2 to 200 seconds.
PTZ
96
