8.6
Local Configuration
System > Local Configuration
What this tab is for
On the Local Configuration tab, you can configure Live View settings and set the paths to the
storage folders for snapshots, clips and downloads.
Live View Parameters
Use this section to set the protocol type and live view performance.
To configure the Live View parameters
1
Select the protocol to be used.
TCP: Ensures complete delivery of streaming data and better video quality. Real-time
transmission will be affected, though.
UDP: Provides real-time audio and video streams.
Multicast: For information about multicast, see the description of the TCP/IP tab of the
Network page.
HTTP: Provides the same quality as the TCP option without setting specific ports for
streaming under some network environments.
2
Set Play Performance to Shortest Delay or Auto.
3
Set Rules to Enable or Disable.
This setting determines the behaviour of your local browser. To have the coloured
overlays shown or hidden when motion detection, face detection, or intrusion detection
is triggered, select Enable or Disable, respectively. With Rules and face detection both
enabled, faces are marked with a green rectangle in Live View once they are detected.
4
Select the image format to be used for captured pictures.
System
40
