10.9
Network > Mail
What this tab is for
The system can be configured to send an email notification to all designated receivers if an
alarm event, such as a motion detection, video loss or video tampering event, is detected.
Before you continue
Go to the TCP/IP tab of the Network page and make sure that the IPv4 address, the IPv4
subnet mask, the IPv4 default gateway and the preferred DNS server are set correctly.
To configure the email settings
1
In Sender, type the name of the email sender.
2
In Sender's Address, type the email address of the sender.
3
In SMTP Server, type the IP address or host name of the SMTP server (for example,
smtp.263xmail.com)
4
In SMTP Port, type the port number of the SMTP port.
The default TCP/IP port for SMTP is 25 (not secured). The SSL SMTP port is 465.
5
In the E-mail Encryption list, select SSL, if this is required by the SMTP server.
6
Select Attached Image, if you want to send emails with attached alarm images.
7
In the Interval list, select the required interval (in seconds).
The interval refers to the time between two actions of sending attached pictures.
8
If your email server requires authentication, select Authentication.
Users will be prompted for the logon user name and password to log on to the server.
9
In the Receiver table, type the details of up to three receivers who are to be notified of
the alarm.
10
Click Save.
Network
57
