The alarm remains active until you click Clear Alarm.
12.5
Exception
Events > Exception
What this tab is for
On the Exception tab, you can link actions to the occurrence of an Exception Alarm. The
exception type can be HDD Full, HDD Error, Network Disconnected, IP address Conflicted and
Illegal Login to the camera.
To set the actions for exception alarms
1
In the Exception Type list, select the exception you need to configure.
2
Select the required actions (see descriptions below).
Options: Send Email, Notify Surveillance Center, Trigger alarm Output.
3
Click Save.
4
Repeat steps 1-3 for other exception types you need to configure.
Send Email
Send an email with alarm information to a user or users when an event occurs. Before emails
can be sent, the related settings on the Mail tab of the Network page must be correctly and
completely configured.
Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event occurs.
Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs. Before the output can be
triggered, the related settings on the Alarm Output tab of the Events page must be correctly
and completely configured.
Events
76
