Siqura pd1103, User Manual

Page: 95 / 103

14 PTZ
On the PTZ page, you can configure the PTZ parameters of the camera.
In This Chapter
14.1 Settings............................................................................................................. 95
14.2 Zero Position...................................................................................................... 97
14.3 Home Action.......................................................................................................98
14.4 Limit................................................................................................................. 99
14.5 Auto Tracking................................................................................................... 100
14.6 Clear Config......................................................................................................101
14.1 Settings
PTZ > Settings
What this tab is for
This is where you can configure the basic PTZ parameters, including proportional pan, preset
freezing, preset speed, etc.
Basic parameters
Here you can configure the following settings:
● Proportional Pan: If you enable this function, the pan/tilt speeds change according to the
amount of zoom. When there is a large amount of zoom, the pan/tilt speed will be lower to
prevent the image from moving too fast in the live view window.
● Preset Freezing: This function enables the live view to switch directly from one scene
saved as a preset to another, without showing the intermediate areas between the two, to
ensure the surveillance efficiency. It can also reduce the use of bandwidth in a digital
network system. Note that the Preset freezing function is invalid when you call a pattern.
95