14.4
Limit
PTZ > Limit
What this tab is for
On this tab, you can program the camera to move within configurable limit stops (left/right,
up/down).
To set limit stops
1
Use the PTZ panel to position the camera as required.
2
Select Enable Limit.
3
Click to open the Limit Type list.
4
Select Manual Stops or Scan Stops.
Manual Stops: You can operate the PTZ control panel manually only in the limited
surveillance area.
Scan Stops: The random scan, frame scan, auto scan, tilt scan, panorama scan is
performed only in the limited surveillance area.
Note that Manual Stops has priority over Scan Stops. When you set the two limit types
at the same time, Manual Stops is valid and Scan Stops is invalid.
5
Click the PTZ control buttons to find the left/right/up/down limit stops.
You can also call the defined presets and set them as the limits of the camera.
6
Click Set to save the limits.
7
(Optional) Click Clear to clear the limits.
PTZ
99
