Mode d'emploi
6
Pneus
1.
Lorsque vous travaillez avec des pneus, assurez-
vous que la machine est bien placée et stabilisée
(avec des cales).
2.
Monter des pneus requiert des connaissances
suffisantes et des outils conformes aux
réglementations.
3.
Les réparations des pneus ne peuvent être
effectuées que par des professionnels disposant
des bons outils.
4.
Vérifiez la pression des pneus régulièrement.
Respectez les réglementations en vigueur pour la
pression des pneus !
Entretien
1.
L'entretien, les réparations, le nettoyage ou autre
ne peuvent être effectués que lorsque l'arbre de
transmission est débranché et que le moteur est
éteint, et que la clé de contact a été retirée !
2.
Vérifiez les écrous et les vis régulièrement pour
vous assurer qu'ils sont assez serrés. Sinon,
resserrez-les !
3.
Si vous faites des travaux d'entretien et que
l'outillage est surélevé, stabilisez-le
systématiquement avec des cales appropriées.
4.
Utilisez des outils et des gants appropriés lorsque
vous remplacez les pièces coupantes de la
machine !
5.
Rangez correctement les huiles et les graisses !
6.
Avant de réparer les appareils électriques, coupez
le courant – retirez le fusible !
7.
Du fait que les appareils de sécurité s'usent, ils
doivent être contrôlés régulièrement et
remplacés à temps !
8.
Lorsque vous soudez sur le tracteur ou sur la
machine qui est montée sur le tracteur,
débranchez le câble de la batterie et du
générateur !
9.
Utilisez uniquement les pièces détachées
certifiées, elles garantissent une durée de vie
plus longue de la machine !
10.
Lorsque vous faites le plein, utilisez uniquement
de l'azote. Risque d'EXPLOSION !
1. Avant-propos
L'ameneur rotatif SIP est équipé de tous les appareils
prescrits par la législation.
Mais il n'est pas possible de protéger tous les endroits
dangereux, étant donné la fonction même de la
machine. Sur la machine se trouvent des autocollants
qui signalent un danger dans cette zone. Les
autocollants sont jaune et noir.
Lisez attentivement les autocollants de
sécurité, vérifiez sur la machine où ils se
trouvent, du fait que certaines zones sont
dangereuses.
Summary of Contents for SPIDER 400/4 ALP
