E
.
The Function For 200 Point
37
corresponding UCS. This is because the subsidiary zero position is taken as the
original point of the UCS under the relative display mode. In Fig. (1), we can see
that Point O is at the position(-80, -30) with respect to Point 1, (-70, -40) with
respect to Point 2, and (-60, -40)with respect to Point 3. If the operator enter the
coordinates of a subsidiary zero point other than the zero position in the absolute
mode, the displayed data will be the position with respect to subsidiary zero point
in the corresponding UCS. For example, when the position of the third subsidiary
zero position is entered at Point E, the resulted display will be (-50, -30).
Method 2: Clearing when the position is reached. When the machine tool is at
the position of the subsidiary zero point, key
We take the working piece shown in Fig. (1) as example again: Move the
machine table to the center point O shown in Fig. (1).
1) Enter the absolute display mode, reset,
set the zero position in the absolute
mode at the main reference point.
2) Move the machine table of the machine
tool to Point 1.
X axis display -80,
Y axis display -30,
3) Enter the display node of the first UCS.
Key
or
4) Set the subsidiary zero position.
Key
5) Return to the absolute state display
mode
Key
6) Move the machine table of the machine
tool to Point 2.
X axis display 70,
Y axis display-40.
1
X
X
X
X
X
X
X
X
Summary of Contents for SDS2MS
Page 4: ...Illustration of Panel and Keyboard 1...
Page 21: ...B Smooth R 13 B Smooth R Iran agent Tel 021 66 3939 00 Mob 0912 147 3023 www Sino ir...
Page 30: ...C Simple R 22 C Simple R Iran agent Tel 021 66 3939 00 Mob 0912 147 3023 www Sino ir...
Page 65: ...J N3 Function 57 J N3 Function Iran agent Tel 021 66 3939 00 Mob 0912 147 3023 www Sino ir...
