SINO SDS2MS, Operation Manual

Page: 18 / 75

A. Basic Function
10
9) Input the compensation setup of the 4th segment
Press
Press , and enter into the next set-up point
10) Input the compensation setup of the 5th segment
Press
Press , and enter into the next set-up point
11) Input the compensation setup of the 6th segment
Press
After the setup is finished, press key to exit.
Remarks: The input zone for the compensation value of Y axis and Z axis is the
coordinate display zone of X axis.
2. The cancellation method of Segmented compensation value
The Segmented compensation value is only aimed at the digit display meter,
raster ruler and machine tool set up together. If the raster ruler or digit display
meter whose Segmented compensation value is set up in a machine tool is moved
to another machine tool, the Segmented compensation value needs to be reset.
When the Segmented compensation function is not needed, the Segmented
compensation value is to be cancelled. The cancellation method is:
According to the set-up method of Segmented compensation indicated above,
when it is indicated to input the quantity of compensation points, input 0 as the
compensation segment, then all the compensation setup parameters are initialized.
At this time, all the compensation values set up before are cancelled automatically.
3. Finding the function of the mechanical origin
If there is power off when the raster ruler is moving, or the rater ruler is
moved before the power is on, after re-start, the mechanical origin needs to be
found again. Because of movement in power off or before power on, the
coordinate origin of the machine tool can not match the value in the digit display
meter. If the mechanical origin is not found, the misplaced relationship is brought
into the later user coordinate system. As when calculating the user coordinate, the
4
0
5
0
6
0