E
.
The Function For 200 Point
36
1) After setting the zero position in the absolute mode, the system automatically
perform a keeping in memory operation, in order that once a power interruption
happen in the course the zero position may be tracked back.
2) Enter the UCS display mode. (Two Method)
Method 1:
Key
Key
Method 2:
Key
Key
3) Enter the position of the first subsidiary zero position.
Key
4) Enter the position of the second UCS.
Key
or
5) Enter the position of the second zero position.
Key
6) Enter the display mode of the third UCS.
Key
or
7) Enter the display mode of the third zero position.
Key
The setting of all the subsidiary zero positions of the working piece shown in
Fig. (1) has been finished.
Why the enter position coordinates of every subsidiary zero position are just
in the opposite direction of the displayed values? Let us explain this with the
above example. Under the UCS mode, when the coordinates of the subsidiary zero
position are entered at the position of the zero position in the absolute mode, the
displayed data will be the position of the zero position in the absolute mode in the
1
±
±
8
3
0
0
2
7
0
0
0
0
±
4
3
4
6
X
X
X
Summary of Contents for SDS2MS
Page 4: ...Illustration of Panel and Keyboard 1...
Page 21: ...B Smooth R 13 B Smooth R Iran agent Tel 021 66 3939 00 Mob 0912 147 3023 www Sino ir...
Page 30: ...C Simple R 22 C Simple R Iran agent Tel 021 66 3939 00 Mob 0912 147 3023 www Sino ir...
Page 65: ...J N3 Function 57 J N3 Function Iran agent Tel 021 66 3939 00 Mob 0912 147 3023 www Sino ir...
