E
.
The Function For 200 Point
38
7) Enter the display mode of the second
UCS.
Key
8) Clear, set the second subsidiary
zero point.
Key
9) Return to the absolute state display
mode.
Continue to touch three times key
10) Move the machine table of the
machine tool to Point 3.
X axis display 60,
Y axis display 40.
11) Enter the display mode of the
third UCS.
Key
12) Clear, ser the third subsidiary
zero point.
Key
13) Return to the absolute state display
mode.
Continue to touch four time key
The setting of all the subsidiary zero positions of the working piece shown in
Fig. (1) has been finished.
Ⅳ
. The usage of subsidiary zero positions.
After entering the display mode of the UCS, the corresponding subsidiary
zero positions may be used to help in the processing.
It is possible to enter a UCS display mode using key
、
or .
When using keys and , you may key or continuously until
2
3
X
X
X
X
X
X
X
X
X
Summary of Contents for SDS2MS
Page 4: ...Illustration of Panel and Keyboard 1...
Page 21: ...B Smooth R 13 B Smooth R Iran agent Tel 021 66 3939 00 Mob 0912 147 3023 www Sino ir...
Page 30: ...C Simple R 22 C Simple R Iran agent Tel 021 66 3939 00 Mob 0912 147 3023 www Sino ir...
Page 65: ...J N3 Function 57 J N3 Function Iran agent Tel 021 66 3939 00 Mob 0912 147 3023 www Sino ir...
