22
1
3
2
Under side
&{WpGHGHVVRXV
Reverso
Top side
&{WpGHGHVVXV
Cara
:HOOEDODQFHG
Correct
%LHQHTXLOLEUDGD
'HFUHDVHWHQVLRQ
'LPLQXHUODWHQVLRQ
'LVPLQXLUWHQVLyQ
Increase tension
$XJPHQWHUODWHQVLRQ
$XPHQWDUWHQVLyQ
Puntada superior
demasiado apretada
Top stitch too loose
)LOVXSpULHXUWURSOkFKH
Top stitch too tight
)LOVXSpULHXUWURSWHQGX
Puntada superior
GHPDVLDGRÀRMD
Presser foot lifter
Levier de verrouillage du pied
Palanca pie prensatelas
Foot holder
6XSSRUWGXSLHG
6XMHWDGRUSUHQVDWHODV
Touche de verrouillage du pied
Foot release button
Boton de desprendimiento
prensatelas
CHANGING PRESSER FOOT
Be sure the needle is in the highest position. Raise presser
foot lifter.
1. Push presser foot release button to remove the foot.
2. Place the desired foot on the needle plate aligning the
presser foot pin with the foot holder.
3. Lower the presser foot lifter so that the foot holder snaps
on the foot.
ADJUSTING TOP THREAD TENSION
675$,*+7
67,7&+,1*
The correct appearance of your stitching is largely determined
by the balanced tension of both top and bobbin threads. The
WHQVLRQLVZHOOEDODQFHGZKHQWKHVHWZRWKUHDGVµORFN¶LQWKH
middle of layers of the fabric you are sewing.
,IZKHQ\RXVWDUWWRVHZ\RX¿QGWKDWWKHVWLWFKLQJLVLUUHJXODU
\RXZLOOQHHGWRDGMXVWWKHWHQVLRQFRQWURO'RWKLVKRZHYHU
only after you have determined that the machine is correctly
WKUHDGHGVHHSDJH
0DNHDOODGMXVWPHQWVZLWKSUHVVHUIRRWµGRZQ¶
$EDODQFHGWHQVLRQLGHQWLFDOVWLWFKHVERWKWRSDQGERWWRPLV
usually only desirable for straight stitch sewing.
=,*=$*6$7,167,7&+'(&25$7,9(DQG
%87721+2/(6(:,1*
For zigzag sewing, satin stitch and decorative stitch functions,
thread tension should be less than that for straight stitch
sewing.
It is recommended to decrease thread tension for buttonholes.
You will always obtain a nicer stitch and less puckering when
the upper thread appears slightly on the bottom side of your
fabric.
%2%%,17(16,21
7KHEREELQWHQVLRQKDVEHHQFRUUHFWO\VHWDWWKHIDFWRU\
VR\RXGRQRWQHHGWRDGMXVWLW
+LQW$VOLJKWDGMXVWPHQWWRDKLJKHUQXPEHURUD
ORZHUQXPEHUPD\LPSURYHVHZLQJDSSHDUDQFH
