Sindoh A1 Series, User Manual

Page: 16 / 133

6. Instructions for Use
- Precautions for resin
•
Wear nitril gloves all the time while handing the resin.
• Check the remaining resin capacity before starting print. In case that manual supply of resin
is necessary, check if the device is not operating and supply resin into tank very slowly in order
to prevent bubbles because bubbles can degrade the print quality.
- Precautions for resin tank
•
Underneath the resin tank, there is transparent sheet made of Teflon. The print quality can
be degraded if the sheet is damaged or deformed due to user’s carelessness. Replace the
transparent sheet or resin tank itself as soon as sheet damage or deformation is found.
- Precautions for platform
•
Use a scrapper to remove prints from the platform.
• After removing prints from the platform, it should be cleaned up for the next print job.
- Never operate the device in the way this manual does not specifically instruct.
- Never try to open orange cover. It may cause degradation of print quality, print failure and
damage on eyes due to laser exposure.
Notification for California customers, USA
- This product uses chemicals known to the State of California to cause cancer and birth defects or
other reproductive harm. This appliance and its accessories can cause low-level exposure to
chemicals during operation, which can be reduced by operating the appliance in a well ventilated
area.
Before Using the Device