Sindoh A1 Series, User Manual

Page: 10 / 133

Laser safety
The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser based optical units in the
field. The optical housing unit can only be repaired in a factory or at a location with the requisite equipment.
The laser subsystem is replaceable in the field by a qualified Customer -Engineer. The laser chassis is not
repairable in the field. Customer engineers are therefore directed -to return all chassis and laser subsystems to
the factory or service depot when replacement of the optical subsystem is required.
Exterior covers
Do not remove exterior covers. Removing covers can make user exposed to serious dangers, and will make
warranty of the device void.
Resin
Nitril gloves should be worn in case of handling resin to preventing contact with resin. Wearing protective glass
is strongly recommended to prevent splashing of resin into eyes. Be careful not to let resin accidentally enter
inside the body through nose or mouth.
Finishing tools
Some of finishing tools being used to handle printed outputs such as scrappers, knives, tweezers, nippers, etc)
have sharp edges. Handle them with caution because it may cause injury or hazardous situations in sudden.
Before Using the Device