Sindoh A1 Series, User Manual

Page: 127 / 133

4.3.2 Replacing Release Film
Wear clean nitril gloves before starting cleaning.
If film is seriously damaged, replace it according the following procedure. Contact your local service
center regarding ordering film replacement kit.
Cleaning resin tank
For details of how to clean resin tank, refer to [Resin Tank] of [5.Maintenance].
Removing transparent window
Turn the resin tank upside down with the transparent window of resin tank facing up. Then, place it
on a flat surface.
Using a cross head screw driver enclosed in finishing kit, remove 16 screws and disassembly the tray,
which the transparent window is attached to. After taking out the tray, turn the tray again, and place
it on a flat surface in a original direction.
After removing tray, remove a rubber gasket by lifting it up.
2
1
Rubber Gasket
Tray
5 Maintenance