Sindoh A1 Series, User Manual

Page: 90 / 133

Cleaning resin tank
Release locking levers in both sides and pull out resin tank from the device.
- Before removing resin tank, check if platform cleaning has been done. If not, resin may be dropped
to protective glass. It may result in contamination of optical parts such as protective glass, laser unit,
etc or penetration of resin into the device.
- If there is remaining resin in resin tank, be sure not to drop or splash resin in handling resin tank.
To prevent contamination of transparent acryl window in the bottom of resin tank, use some supports
in four corners or lay a clean piece of paper underneath.
2
Resin Tank
Supporters
4 Printed Output Check