Simrad ARGUS FMCW 3G, User Manual

Page: 136 / 150

134 |
Alert and system failures | Argus Radar Operator Manual
Message Meaning
WRONG: No file by that Name Found No file found corresponding with specified
name
WRONG: No Item Selected There is no item selected
WRONG: No Map Name The map has no name
WRONG: No Map Selected There is no map selected
WRONG: No More Maps Available No available memory for additional maps
WRONG: No More Segments Available Not possible to add more segments
WRONG: No More Symbols Available Not possible to add more symbols
WRONG: No More Texts Available Not possible to add more texts
WRONG: No Point Near Enough Is not present a point near enough
WRONG: No Reference Target Reference target has not been selected
WRONG: No Steady Target The target is not stationary
WRONG: No Target No target is found
WRONG: No Target Selected There are no targets selected
WRONG: Not Allowed The action is not allowed
WRONG: Not Allowed to Cancel Ext TGT Is not possible to remove an external target
WRONG: Not Allowed Without Alpha Expan-
sion The action is not allowed without alpha
expansion
WRONG: Not Available Not available
WRONG: Not Possible at 96 NM The action cannot be accomplished at 96 NM
WRONG: Not Possible For TXRX 3 And 4 Cannot be done for TXRX3 and 4
WRONG: O
ffcenter > 50% Not allowed an off-centre superior than 50%
of PPI
WRONG: Out of Memory No more memory available
WRONG: Out Of TT Max Range Impossible to track over 24 NM
WRONG: Point Outside of Ownship Dimen-
sions The selected point is outside own ship
dimensions
WRONG: Presentation is TM Cannot be executed because presentation is
in True Motion
WRONG: Range Scale too Low Range scale is to low to allow the action
WRONG: Read Only Task C
onfiguration Not possible to change a read only configu-
ration
WRONG: Relative Mode Selected True Motion mode not possible at 96 NM
WRONG: Sector Overlapping The selected sectors are overlapping
WRONG: SOG Not AVAIL Speed Over Ground data is not available
WRONG: Speed Log Failure There is currently a failure of the speed log
system
WARN: Stabilization changed The system has changed stabilization mode
WRONG: STW Not AVAIL Speed Through Water data is not available
WRONG: Target Tracking Fail There is currently a failure of the Target Track-
ing system
WRONG: Too Far Action attempted on an element too far
away
WRONG: Too many Too many elements
WRONG: Too Many Files Already Present No more files are allowed
WRONG: Trigger Failure There is currently a failure of the transceiver
Trigger
WRONG: TT Symbols O
ff Cannot be executed because TT symbols are
off
WRONG: Upgrading Software System is busy because of a software update