Simrad ARGUS FMCW 3G, User Manual

Page: 135 / 150

| 133
Alert and system failures | Argus Radar Operator Manual
List of wrong operation messages
The following table lists the possible messages displayed when a wrong operation is carried
out. This wr
ong operation does not influence the System. When a Wrong Operation message
is generated, the wrong orders button is displayed in its area, labelled with a message cor-
responding to the wrong action performed.
The Wrong Orders can be acknowledged by means of the wrong orders button.
Message Meaning
Cannot Read USB Device Is impossible to read the USB device
Error Saving Map, Not Saved Error during the map saving: map is NOT
saved.
Not Allowed: Alarm Still Valid Action is not allowed: the alarm is still pres-
ent
USB Device Busy USB device not available for usage
WARNING: File Too Big The file is too big to be saved
WARN: Set To Relative Vector The system has been reverted to relative
vectors
WARN: Visible if Range > 24 NM Warning: is visible only if range is superior
than 24 NM
WRONG: AIS On Cannot be executed because AIS is on
WRONG: Antenna Failure There is currently a failure of the transceiver
Antenna
WRONG: Auto Drift Speed Selected Cannot be executed because Auto Drift is the
speed source
WRONG: Cannot read map Not possible to read map
WRONG: Cannot write map Map cannot be written
WRONG: Cursor outside PPI The cursor is not inside the operative area
WRONG: Delay Time Too Long Selected Delay Time is too long
WRONG: Empty map The map is empty
WRONG: EPFS Failure There is currently a failure of the EPFS system
WRONG: EPFS Local Time Not Available There is currently a failure of the EPFS local
time data
WRONG: EPFS Speed Failure There is currently a failure of the EPFS Speed
data
WRONG: ERBL Off Electronic Range and Bearing Line is cur-
rently off
WRONG: Error Reading Map Error during map reading
WRONG: Fixpoint already used The selected fixpoint is already used
WRONG: Gyro Failure There is currently a failure of the gyrocom-
pass system
WRONG: Head Up Mode Cannot be executed because the system is in
Head Up Mode
WRONG: Invalid Target The target selected is not valid
WRONG: Lost Target Target is lost
WRONG: Manual Drift is ON Cannot be executed because Manual Drift is
on
WRONG: Manual Speed Cannot be executed because Manual Speed
is selected
WRONG: Map Name Already Exists The selected name is already existing
WRONG: MAX Value is End - 12 Maximum allowed value is "End - 12"
WRONG: MAX Value is Start - 12 Maximum allowed value is "Start - 12"
WRONG: MIN Value is End + 12 Minimum allowed value is "End + 12"
WRONG: MIN Value is Start + 12 Minimum allowed value is "Start + 12"