Simons Voss Technologies SmartHandle AX Manual Download

Page: 158 / 178

2. Push the Allen wrench towards the nearer edge and hold it pressed.

3. Remove the handle from the assembly.

SmartHandle AX is disassembled.

15.4.2 CISA

1. Remove the panic bar as described in the manufacturer's documenta-

tion except for the adapter plate.

NOTE

Third party product with own documentation

The panic bar holder is a third-party product.



Please follow the manufacturer's instructions and safety instructions.

2. Unscrew the screws of the mounting plate.

3. Pull out the fitting with the adapter plate and the square.

SmartHandle AX is removed from the door.

4. Unscrew the screws that fix the SmartHandle AX to the adapter plate.

Adapter plate is removed.

5. Push the locking pin of the square inward and pull the square out of the

assembly.

The square is removed.

SmartHandle AX

(Manual)

15. Disassembly

158 / 178

Summary of Contents for SmartHandle AX



















































































































































































Search results

Summary of Contents for SmartHandle AX

Reviews:

Related manuals for SmartHandle AX

Brands by name

Popular brands

Simons Voss Technologies SmartHandle AX, Manual

Search results

Summary of Contents for SmartHandle AX

Reviews:

Related manuals for SmartHandle AX

Brands by name

Popular brands