Simons Voss Technologies SmartHandle AX, Manual

Page: 136 / 178

7 Programming
ü
LSM software version 3.4 SP1 or higher installed.
ü
LSM open.
ü
SmartCD.MP or SmartCD.G2 connected (recommended: SmartCD.MP).
1. Select the locking system that you require. Use the ... button to open
the locking system properties and use the and buttons to select
the required lock system.
2. Click on the button to add a new locking device.
9 The "New lock" window will open.
3. Open the
▼ Area
drop-down menu.
4. Select the area.
5. Open the
▼ Lock type
drop-down menu.
6. Select the "AX SmartHandle" item.
7. Complete the rest of the form.
8. Click on the Save & next button.
9 Locking device has been added.
9. Click on the Exit button.
9 Window closes.
10. Highlight the entry on the SmartHandle AX in the matrix.
11. Align the Smart CD.MP with the SmartHandle AX or place the
SmartCD.G2 about ten centimetres away from the SmartHandle.AX.
NOTE
Duration of initial programming
A large amount of data is transferred during initial programming. The data
transfer speed is higher with a SmartCD.MP (and the programming time is
therefore shorter).

If possible, use a SmartCD.MP for initial programming.
12. Right-click on the SmartHandle AX entry in the matrix to open the con-
text menu.
13. Select the Programming item.
14. Open the
▼ Type
drop-down menu.
15. Select the "Card reader (SmartCD MP)" entry or "SmartCD" entry.
16. Click on the Programming button.
9 Programming launches.
17. Wait for programming to complete.
9 SmartHandle AX is programmed.
SmartHandle AX (Manual)
7. Programming
136 / 178