Simons Voss Technologies SmartHandle AX Page 88 Manual Download

Page: 88 / 178

Locking device added in LSM software.

LSM software launched.

Programming device connected.

1. Position the programming device.

2. Programme the SmartHandle AX (see , quick guide or LSM manual for

details).

SmartHandle AX is programmed.

Preparing square and screws

1. Measure the thickness of your door.

2. Use a saw to shorten the supplied screws and the square (screws: Door

th12 mm, square

(panic bar)

: Door th23 mm, square

(panic bar)

Door th32 mm).

Square and screws prepared.

The L1 screw must meet increased requirements and is not included in the
scope of delivery. Order this screw directly from BKS.

SmartHandle AX

(Manual)

6. Installation

88 / 178

Summary of Contents for SmartHandle AX



















































































































































































Search results

Summary of Contents for SmartHandle AX

Reviews:

Related manuals for SmartHandle AX

Brands by name

Popular brands

Simons Voss Technologies SmartHandle AX, Manual

Search results

Summary of Contents for SmartHandle AX

Reviews:

Related manuals for SmartHandle AX

Brands by name

Popular brands