Sime MURELLE 110 BOX ErP, User, Installation And Servicing Instructions

Page: 17 / 52

17
NOTE: A label is affixed inside the top
door of the boiler panel, bearing the
appropriate values of PAR 1 and PAR 2
(fig . 19)
3 .3 .2 Warning
If the boiler is not running perfectly and
yet no alarm is active, press
5
3
1
2
4
until info
70 displays with the warning code for the
fault in question.
When the boiler is running perfectly
again, info 70 will read “- -”.
We give a table of warning codes below:
INSTALLER PARAMETERS
EXPANSION BOARD
PAR DESCRIPTION RANGE UNIT STEP DEFAULT
40 Number of expansion boards 0 ... 3 = 1 0
41 Mix valve motion time 0 ... 199 10 sec. 1 12
42 DHW priority on mixed zone 0 = Parallel = = 1
1 = Absolute
43 Screed drying 0 = Disabled = = 0
1 = Curve A
2 = Curve B
3 = Curve A+B
44 Solar thermal system type 1 ... 7 = 1 1
45
∆
t solar heating collector 1 PAR 74 OEM - 1... 50 °C 1 8
46 Solar integration delay “--”, 0 ... 199 Min. 1 0
47 Solar collector Tmin “--”, -30 ... 0 °C 1 - 10
48 Solar integration Tmax “--”, 80 ... 199 °C 1 120
PARAMETER RESET
PAR DESCRIPTION RANGE UNIT STEP DEFAULT
49 * Reset parameters to default -- , 1 = = =
(PAR 1 - PAR 2 equal to “--”)
* If you have difficulty understanding the current configuration or if a malfunction or anomalous behaviour
occurs, we recommend restoring the initial values of the parameters, with PAR 49 = 1 and PAR 1 and PAR
2 as indicated in par . 3 .3 .1 .
CODE DESCRIPTION
E0 Reduced power operation ( ∆ t
between delivery and return less
than 40°C)
E1 External sensor shorted (SE)
E2 TBD
E3 TBD
E4 TBD
E5 TBD
E6 TBD
E7 TBD
E8 TBD
E9 TBD
BOILER PAR 2
Instantaneous with diverter valve
and flowmeter
2
Instantaneous with diverter
valve, flowmeter and solar
connection
2
Remote boiler with diverter valve
and DHW sensor ver. T
(LOW INERTIA)
3
On-board boiler with diverter
valve and DHW sensor
(LOW INERTIA)
4
Remote boiler with diverter
valve, boiler thermostat and only
heating ver. T/R
(LOW INERTIA)
5
Only heating with anti-freeze
sensor
(LOW INERTIA)
9