4
GB
Specification
Voltage: .......................................................................................230V~ , 50Hz
Power:
.................................................................................................... 240W
Duty Cycle: ...................................................... S2 30 minutes (short time duty)
No load speed – Grinding wheel (n
0
): ................................................2950min
-1
Grinding wheel size: ...................................................................Ø150 x 20mm
Grinding wheel bore: ..............................................................Ø12.7mm (1/2")
Belt size: ..........................................................................................686 x 50m
Belt speed: .............................................................................................15m/s
Protection class: ..........................................................................................
Ingress protection: .....................................................................................IP20
Power cord length: ................................................................................... 1.5m
Dimensions (L x W x H): ....................................................320 x 200 x 295mm
Weight: .....................................................................................................7.1kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound Pressure L
PA
: ............................................................................. 89dB(A)
Sound Power L
WA
: ............................................................................. 102dB(A)
Uncertainty K: ........................................................................................... 3dB
Vibration: ...........................................................................................<2.5 m/s
2
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction Manual
Caution!
DO NOT use in rain or damp environments!
For indoors use only!
Be aware of kickback!
Class I construction (double insulated for additional protection)
Dust extraction required or recommended
Always disconnect from the power supply when adjusting, changing
accessories, cleaning, carrying out maintenance and when not in use!
Important safety devices! Ensure correct function, maintain in accordance
with instructions and DO NOT disable!
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for recycling advice
WARNING:
Always wear ear protection where the sound level exceeds 85dB(A) and
limit the time of exposure if necessary. If sound levels are uncomfortable, even with ear
protection, stop using the tool immediately and check the ear protection is correctly fitted
and provides the correct level of sound attenuation for the level of sound produced by
your tool.
WARNING:
User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do
not operate the tool with hands below a normal comfortable temperature, as vibration will
have a greater effect. Use the figures provided in the specification relating to vibration to
calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745
or similar international standards. The figures represent normal use for the tool in
normal working conditions. A poorly maintained, incorrectly assembled, or misused tool,
may produce increased levels of noise and vibration.
www.osha.europa.eu
provides
information on sound and vibration levels in the workplace that may be useful to domestic
users who use tools for long periods of time.
General Power Tool Safety Warnings
WARNING!
When using electric power tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury including the following
safety information. Read all these instructions before attempting to operate this product
and save these instructions for future use.
WARNING:
This appliance is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children must be supervised to ensure that they do not play
with the appliance.
CAUTION:
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed. Use
of the power tool for operations different from those intended could result in a hazardous
situation.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1 -
Keep work area clear
- Cluttered areas and benches invite injuries
2 -
Consider work area environment
- Do not expose tools to rain
- Do not use tools in damp or wet locations
- Keep work area well lit
- Do not use tools in the presence of flammable liquids or gases
3 -
Guard against electric shock
- Avoid body contact with earthed or grounded
surfaces (e.g. pipes, radiators, ranges, refrigerators)
Original Instructions
V
Volts
A, mA
Ampere, milli-Amp
n
o
No load speed
Hz
Hertz
W, kW
Watt, kilowatt
/min or min
-1
(revolutions or reciprocation) per minute
Technical Abbreviations Key
612519_Z1MANPRO2.indd 4
11/06/2015 12:37
