Silvercrest SFW 350 D3, Operating Instructions Manual

Page: 40 / 166

SFW 350 D3
GB
│
IE
│ 37 ■
Making biscuits
After you have made the biscuit pastry according to your recipe, and after having
fixed the biscuit attachment
1
:
1) Line a small baking tray with greaseproof paper and place or hold it directly
under the exit opening at the front of the appliance .
2) Press pastry evenly into the meat grinder casing
6
– the transport screw
q
then pushes it through the selected design on the design motif strip of the
biscuit attachment
1
.
3) When the biscuit is the required length, stop the appliance and break the
pastry off at the exit opening . Lay the biscuits on the baking tray .
4) When you have read and understood all of the instructions on the topic
“Biscuits”, you can now use the appliance as described in the chapter
“Operating the appliance” .
Straining tomatoes
1) Place a container under the tomato outlet
8
.
2) Place a container at the front under the strainer sieve
0
.
3) Quarter the tomatoes and push them into the meat grinder casing
6
slowly
and evenly .
The plastic screw
9
pushes the tomatoes through the strainer attachment .
The strained tomatoes fall into the tomato outlet
8
.
The tomato skin is ejected from the strainer sieve
0
at the front of the appli-
ance .
NOTE
If tomato juice starts leaking from the screw joints of the strainer attach-
ment, this can have the following causes:
–
You are working too fast .
–
You are using too much pressure to press the tomato pieces into
the appliance .
–
The tomato pieces are too large .
► Try working more slowly, press the tomato pieces gently into the appliance
and cut the tomatoes into smaller pieces .
4) Once you have read and understood all of the instructions in the section
“Straining tomatoes”, you can use the appliance as described in the section
“Operating the appliance” .
IB_314659_SFW350D3_LB8.indb 37 21.01.19 14:53